Signup for our Newsletter for a 10% off select items on your first order
parallax

Thank You for purchasing and/or showing interest in the ADPT Series 1 Dual-Time Watches!

Below you will find instructions on how to use this timepiece. Over a year in the making, the ADPT Series 1 Watches started with the simple notion of making modern sports watches that took the ethos of “All Day, Purpose, and Terrain” to heart. They're multipurpose, easy to wear, well-built, and unique. Inspired by outdoor gear and a love for adventure, the design is bold, graphic and exciting. For the case, we worked with BOLDR Supply Co to utilize their 200m, 38mm, titanium field design, which will take you anywhere you need to go, above or below water.

ADPT_S1_DT_GROUP_2.jpg__PID:0467083f-5cbe-47bc-a0e8-f285383c6aae
adpt-ti-gmt-24-zpina-hi-5.jpg__PID:5cbe17bc-20e8-4285-b83c-6aae4db9e6d2

How to start the watch:

Using the ADPT Series 1  Dual-Time Watch is simple. It features the very robust and reliable SII NH34 automatic dual-time movement inside. If the watch is not running, simply unscrew the crown by turning it counterclockwise until it pops out (please note, do not unscrew the crown underwater). You can then wind it clockwise to put initial energy into the movement. We recommend 10 - 20 turns. At this point, you can set the time. 

How to set time and date:

With the crown unscrewed, gently pull it out two clicks (this is as far as it can go). Now you can turn the crown either direction to change the position of the hour and minute hands. Please note, the seconds hand will “hack” and not be adjustable. For preservation of the movement, it is recommended to not change the time between 9PM and 3AM, as this is when the date-change will occur. Once set, push the crown back to its starting position.

If the date needs to be adjusted, pull the crown out one click. The date can be set forward one day at a time by turning the crown counterclockwise. Once the desired date is reached, push the crown back in.

Once the time and date are set, screw the crown back in fully.

adpt-ti-gmt-24-zpina-hi-3.jpg__PID:20e8f285-383c-4aae-8db9-e6d23647b81e
ADPT_S1_DT_AQUA_BERRY_8_CROP.jpg__PID:b70684a8-8a9b-4dde-bf1c-e15ecee4ee1c

How to set the 24-hour hand:

With the crown pulled out one stop, you can adjust the 24-hour hand in one hour increments independently from the 12-hour hand by turning the crown clockwise. The hand can only be set one direction.

Because it is independent, you can set the 24-hour hand to either the same time as your local time for a 24-hour view, or to a different time-zone.

When traveling, if you wish to see both your current local time, and your home time, first set the 12-hour hand to the local time observing AM/PM. Once set, adjust the 24-hour hand to your home time.

Always be sure to push the crown back in, and  screw it down when done.

How to use the bezel:

The ADPT Series 1 Dual-Time Watches are equipped with uni-directional, 120-click bezels. The bezel insert features two indexes: a primary minute index, and a compass index. The minute index can be used simply as a 60-minute reference for telling time, or it can be rotated and aligned with the minute hand to track elapsed time.
The compass index (E, S, W) can be used as a reference if the watch is to be used to determine north. When set to local time, hold the watch flat in your hand and turn it so the 12-hour hand points towards the sun. The 24-hour hand will then be pointed in a northerly direction. Turn the bezel so the origin point aligns with the hand to mark it, and E, S, and W will fall into place.

adpt-ti-gmt-24-zpina-hi-2.jpg__PID:8a9b4dde-3f1c-415e-8ee4-ee1c6ee555de
ADPT_S1_DT_CASE_1.jpg__PID:4dde3f1c-e15e-4ee4-ae1c-6ee555de24ad

How to change the strap:

The ADPT Series 1 Dual-Time Watch comes mounted to a US-Made Single Pass strap. This is a “pass-through” nylon strap, meaning that it slips between the springbars and the case. It can be easily removed by simply pulling it through. Similarly, it can be replaced with any other “pass-through” style of strap in a similar fashion.

In order to change to a two-piece strap the springs bars must first be removed. This is an easy process, as the ADPT Series 1 Dual-Time Watch features drilled lugs (small holes where the spring bars are positioned). A spring bar tool (which can be ordered here) with a “pusher” tip (long cylinder) can be inserted into the hole, and then pressed into the spring bar, causing it to release from the case.

With the spring bars removed, they can be placed into the desired strap, and the strap can then be attached to the watch.

ADPT Watches Warranty:
All ADPT watches come with a 30-month warranty on the internal components of the watch. The 30-month warranty excludes parts that are subjected to (external) wear & tear, which is deemed as damage/alteration to straps, scratches on case and/or lugs, cracked crystal, water damage due to negligence (crown not fully screwed down), and other incidents of similar nature. If the movement proves to be defective in terms of material or workmanship (under normal use), we will repair your watch and ship it back to you. The repair & return process takes an estimated 6-12 weeks. Please note that repairs may be delayed by unforeseen circumstances which may interfere with the shipment process. A shipping, handling & servicing fee of $30 applies to all engagements of warranty services, to be borne by the customer. Should the defects be deemed as caused by wear & tear (i.e. not covered under warranty), the customer will be subjected to the cost of the part involved on top of the $30 service fee incurred. For example, replacement of the bezel, crystal, case, etc. will incur a separate charge. The warranty does not cover straps and excludes any watches not purchased directly from the Windup Watch Shop website.

adpt-ti-gmt-24-zpina-lo-23_crop.jpg__PID:e15ecee4-ee1c-4ee5-95de-24ad797262a4